Sam I9100p Dead boot Repair Done by riff box

Sam I9100p Dead boot Repair Done

 lupa save pic nya 

LOGnya:

[23/04/2012 22:31:30] [START OPERATION_ID = RESURRECT]
[23/04/2012 22:33:03] Open serial port...OK
[23/04/2012 22:33:03] Connecting to the RIFF Box...OK
[23/04/2012 22:33:03] Firmware Version: 1.32, JTAG Manager Version: 1.42
[23/04/2012 22:33:03] Selected Resurrector: [Samsung i9100 V1.00]
[23/04/2012 22:33:03]
[23/04/2012 22:33:03] Connecting to the dead body...OK
[23/04/2012 22:33:03] Detected dead body ID: 0x4BA00477 - CORRECT!
[23/04/2012 22:33:03] Set I/O Voltage reads as 2.79V, TCK Frequency is 8 MHz
[23/04/2012 22:33:03]
[23/04/2012 22:33:03] Resurrection sequence started.
[23/04/2012 22:33:03] Establish communication with the phone...OK
[23/04/2012 22:33:03] Initializing internal hardware configuration...OK
[23/04/2012 22:33:03] Uploading resurrector data into memory...OK
[23/04/2012 22:33:03] Starting communication with resurrector...OK
[23/04/2012 22:33:03]
[23/04/2012 22:33:03] Detected an Initialized FLASH1 Chip, ID: 0x0015/0x0001 (VYL00M, 0x0003AB400000 Bytes = 14.68 GB)
[23/04/2012 22:33:03] Detected an Initialized FLASH2 Chip, ID: 0x0015/0x0001 (VYL00M, 0x000000080000 Bytes = 0.50 MB)
[23/04/2012 22:33:03]
[23/04/2012 22:33:03] Flashing the dead body...OK
[23/04/2012 22:33:03] Resurrection complete!
[23/04/2012 22:33:03] [FINISH OPERATION_ID = RESURRECT]